Thermal deburring of different materials

ATL Anlagentechnik Luhden will be presenting efficient solutions for the effective and fast deburring of sdemanding workpieces made of different materials such as metals, plastics and foams. The TEM process is particularly suitable for complex components with difficult-to-access drill branches and internal burrs. The thermal deburring process takes place in two phases: the ignition phase and the deburring phase. The heat required to ignite the burrs is generated exclusively by burning the fuel gas with oxygen. The more massive the burrs to be removed are, the more fuel gas-oxygen mixture must be introduced into the combustion chamber. Combustion of the burrs occurs when the heat generated is sufficiently high to cause ignition. The combustion of the material is self-sustaining as long as there is sufficient oxygen and there is no cooling due to excessively large cross-sections. Suitable fuel gases are methane, hydrogen or natural gas.

13/09/2023