Bystronic Inc. and MSS Nitrogen Inc. establish Strategic Partnership
DMG MORI Pfronten Event 2021

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Bystronic Inc. and MSS Nitrogen Inc. establish Strategic Partnership

Bystronic Inc. and MSS Nitrogen Inc. have entered into a partnership agreement to supply NitroCubeTM - Bystronic N2 Generation powered by MSS, and NitrO2 Mixing – Bystronic NitrO2 Mixing powered by MSS into the North America market. MSS Inc., located in Rockhill, SC will supply the Bystronic Nitrogen Generation and Mixing products as well as provide installation, training and service. Bystronic Inc. will be responsible for the sales and distribution of these products. Bystronic will offer both the NitroCube and NitrO2 products powered by MSS; each model will have a specific scope of application based on the requirements of the customer. 

NitroCubeTM is the most compact Nitrogen Generation system on the market and provides the guaranteed lowest cost and highest purity for Nitrogen. NitroCube is ideally suited to meet the demands of today’s ever-increasing Fiber laser cutting requirements. Typical Nitrogen purity generated by the NitroCube is 99.999% and systems are carefully sized using information based on user consumption figures, assuring correct flow and storage capacity. All NitroCube models deliver pressures at 4,350PSI and are modular and expandable retroactively if required. NitroCube standard models provide volumes from 11,000 ft3/day to 42,000 ft3/day. NitroCube high-flow range models provide volumes from 59,000 ft3/day to 169,500 ft3/day and with combined units up to 378,000 ft3/day, while reliably maintaining purity levels up to 99.999%. NitroCube provides the lowest cost for nitrogen and a short term ROI compared to the costs of traditional bulk liquid gas supply and endless long-term contracts. There is no longer any need to transport gas. You only produce as much 
nitrogen as you actually need, all the additional costs related to – rentals, delivery, and replacing cylinders are eliminated.

The NitrO2 Mixing product offers the advantage of inline mixing of nitrogen and oxygen gas sources to create a custom mixture that both enhances edge quality and increases laser cutting speeds by up to three times faster compared to N2 or O2 single supplies. The NitrO2 is compact, portable, and mixes in real-time and supports cutting pressures up to 500 psi. A separate mixing vessel is not required. Bystronic NitroCube and NitrO2 products powered by MSS, offer increased productivity, enhanced edge quality, reduced cost, and maximum profitability for the end user with minimal floor space requirements.

04/02/2021

Enquire about this StoryReturn to News Overviews

5 Axis Machining: Panther | HAIMER | CAM-Software | hyperMILL

The Panther Project is the best example of successful Teamwork! Together, HAIMER and OPEN MIND demonstrate how complex milling operations can be mastered in a powerful and dynamic way!

DMG MORI Manufacturing USA Image film

DMG MORI Manufacturing USA is DMG MORI’s hub for American manufacturing and automation solutions. Located in Davis, CA, this state-of-the-art manufacturing facility features the latest automation technology and some of the brightest minds in the machine tool industry.

Rainford PrecisionXYZ Machine ToolsLantek Sheet Metal SolutionsMitsuiseiki.comThe Manufacturers Success Connection
DMG MORI Pfronten Event 2021WidiaCG Tech USA bannerAbsolutemachine.comMitsui SeikiWidia mobileJobs advert

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

HPR Drill

5 Axis Machining: Panther | HAIMER | CAM-Software | hyperMILL

The Panther Project is the best example of successful Teamwork! Together, HAIMER and OPEN MIND demonstrate how complex milling operations can be mastered in a powerful and dynamic way!

HPR Drill

DMG MORI Manufacturing USA Image film

DMG MORI Manufacturing USA is DMG MORI’s hub for American manufacturing and automation solutions. Located in Davis, CA, this state-of-the-art manufacturing facility features the latest automation technology and some of the brightest minds in the machine tool industry.

Machines4sale Ltd website uses cookies to ensure you get the best experience, as detailed in our Agree