September 2021 Manufacturing Technology Orders Total $590 Million

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

September 2021 Manufacturing Technology Orders Total $590 Million

Orders of new manufacturing technology totaled $590 million in September 2021, according to the latest U.S. Manufacturing Technology Orders Report published by AMT – The Association For Manufacturing Technology. This was a 9% increase over August 2021 orders and nearly a 60% increase over September 2020. Year-to-date orders in 2021 totaled $4.115 billion, a 53% increase over the total through the first nine months of 2020.

“It took 31 months after the bottom of the 2008-2009 financial crisis to have a single month with half a billion dollars in orders, but September is the third month of 2021 exceeding that mark,” said Douglas K. Woods, president of AMT. “Economists project the United States is past peak growth, yet machine orders remain at a record pace to meet remaining consumer and producer demands.”

Machine shops, which consistently represent the largest share of new orders, pulled back nearly 7% from August 2021 levels. “Machine shop orders usually dictate the direction of the month,” said Woods. “September 2021 was an exception to that trend, which highlights the breadth of the recovery across manufacturing sectors.” After machine shops, the engine, turbine, and power generation sectors had the largest share of orders in September 2021 and their highest monthly value since December 2011. Research indicates these outsized investments are the result of efforts to increase power grid resilience after a year that saw extreme weather test its durability.

15/11/2021

Enquire about this StoryReturn to News Overviews

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

The Reshoring InitiativeRainford PrecisionXYZ Machine ToolsThe Manufacturers Success ConnectionCGTech VERICUT

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

CG Tech USA bannerMitsui SeikiJobs advertAbsolutemachine.com

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree