US Air Force and GE reach next milestone in Pacer Edge Program

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

US Air Force and GE reach next milestone in Pacer Edge Program

Building on the earlier success and momentum of the Pacer Edge program, the US Air Force (USAF) and GE have entered Phase III of its metal additive manufacturing pathfinder. This phase tackles the USAF’s sustainment behemoth of ‘cold starts’ head-on.

Aircraft engine components that are considered ‘cold starts’ are parts that take over 300 days to procure. It is estimated that the USAF has over 800 engine ‘cold starts’ each year.

“The first prioritity, for the USAF and GE team has been to create digital 3D technical data packages (TDPs) for hard to procure, obsolete ‘cold start’ parts and deliver four airworthy, near-net castings. These TDPs will eventually mean that part obsolescence will be a thing of the past,” said Alexa Polites, USAF Pacer Edge program manager, GE Additive.

Over the coming years, the joint USAF and GE team plans to create at least five TDPs, increasing in technical complexity, across the USAF’s sustainment platforms.

“The teaming of GE and the USAF legitimizes utilization of additive manufacturing to address critical needs of the aging aircraft that are currently unsupported within the existing supply chain,” said Zack Miller, Chief, Advanced Manufacturing Program Office, Air Force Rapid Sustainment Office.

“Pacer Edge is accelerating the USAF’s wide spread adoption of 3-D metal printing to organically solve supply chain shortages and realizing its promise to improve warfighter support by drastically reducing lead times and creating additional sourcing options.” Beth Dittmer, Chief, Propulsion Integration Division, Tinker Air Force Base.

Phase III has already successfully printed two components, a bellcrank and a cross shaft arm, in cobalt-chrome on a Concept Laser M2 Series 5, located at GE Additive‘s facility in Cincinnati, Ohio. Work has also progressed on additional components using Alloy 718.

The cornerstone of the USAF / GE Pacer Edge program is the creation of organic capabilities at Tinker Air Force Base (AFB). One way to achieve that is by ensuring that intellectual property generated within the Pacer Edge program is owned by the US Government. This will enable the USAF and Department of Defense to print these parts themselves in the future. The program remains on schedule with the goal to have airworthy production castings delivered to the USAF in Spring 2022.

“In parallel to the TDP creation, GE Additive is working closely with our USAF peers to transfer the production capability to the Tinker AFB Depot. This will establish an organic, airworthy, metal 3D printing capability for the USAF,” said Joe Franzen Jr, technical account manager, GE Additive.

22/11/2021

Enquire about this StoryReturn to News Overviews

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

The Reshoring InitiativeRainford PrecisionLantek Sheet Metal SolutionsXYZ Machine ToolsThe Manufacturers Success Connection

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Absolutemachine.comMitsui SeikiCG Tech USA bannerJobs advert

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree