DALLAS INDUSTRIES DELIVERS FEED LINE TO MANITOWOC TOOL AND MANUFACTURING

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

DALLAS INDUSTRIES DELIVERS FEED LINE TO MANITOWOC TOOL AND MANUFACTURING

Dallas Industries, a leading manufacturer of coil handling, press feeding equipment and controls for the stamping industry has announced that Manitowoc Tool & Manufacturing has taken delivery on another new conventional feed line.

The line is a fully automated 48 in.wide conventional line featuring a model DRFH-530 servo feed, a threading table over the loop, a peeler/theader/coil restrictor, a model DPS-3.5-7-30 powered straightener, and a 20,000 lb. load capacity reel with load car.

To enhance setup, the unit incorporates the feeder passline height, edge guides, coil guide rolls for auto coil centering of the coil on the uncoiler all which are automatically adjusted to position. The settings for these axes are stored in the job recipe—a Dallas feature termed AutoSet.

The line is built on an Allen-Bradley, ethernet-based control architecture and feature SyncLoop and ProfileSelect™. The SyncLoop control synchronizes the feeder and straightener speeds to dramatically enhance the loop’s stability and control.

ProfileSelect™ is a unique feed control system that is exclusively available through Dallas Industries. It uses a cam-motion (sinusoidal) profile. This smooth profile results in a feed motion that utilizes 100 percent of the press feed window, reducing stress on the material and the feed’s mechanical components.

07/02/2022

Enquire about this StoryReturn to News Overviews

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

Rainford PrecisionThe Reshoring InitiativeLantek Sheet Metal SolutionsXYZ Machine ToolsMitsuiseiki.com

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Jobs advertAbsolutemachine.comMitsui SeikiCG Tech USA bannerdgs Marketing Engineers

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree