MAPAL at the AMB 2022MAPAL at the AMB 2022MAPAL at the AMB 2022

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

MAPAL at the AMB 2022

MAPAL at the AMB 2022

AMB will open its doors in Stuttgart from 13 to 17 September 2022 and is eagerly awaited. On a 390 square metre stand in Hall 1, Stand D10, MAPAL's trade fair presentation is clearly divided into the four focus sectors of automotive, aerospace, die and mould making and fluid power technology.

Siegfried Wendel, Chief Sales Officer, comments on the AMB presentation: "We have used the last two years very intensively and strategically realigned ourselves. We have formed a team for our defined focus industries and brought the product portfolio to market maturity. We will present the results of the new market strategy in full for the first time at the AMB. Our customers' future investment plans will certainly also focus on the concept of sustainability. We are taking action in many areas to make machining processes more sustainable. The technology of minimum quantity lubrication plays just as important a role as the hydraulic expansion technology. Replaceable head solutions or the streamlining of tool circulation through intelligent and reliable tool management solutions bring further advantages in terms of sustainability. We look forward to discussing this topic in detail at the trade fair."

Innovations and focus topics at AMB - a selection

New cutting materials for reaming and fine boring, quickly available MN reamers

MAPAL presents the two new cutting materials HP016 and HP018. They are specially designed for the particular requirements of reaming and fine boring high-alloy and stainless steels as well as cast steel and hardened steel. The HP016 cutting material is suitable for all machining operations with a slightly interrupted cut, while the HP018 cutting material is used for continuous cutting conditions. Both are based on a silicon doped PVD coating on two different carbide grades with low cobalt content, which stands for extreme wear resistance and high dimensional accuracy.

The new cutting materials will be used for the market launch in the reamers of the MN series, among others. These tools stand for the very highest accuracies, can also be optimally used for hard reaming and for reaming stainless steel thanks to the new cutting materials and are now available within ten working days. They function according to the “MAPAL principle” - with one indexable insert and guide pads arranged around the circumference, which are made of carbide, cermet or PCD depending on the application.

E-Mobility: Basic, Performance and Expert Solutions

Tool solutions for e-mobility are of particular importance in the automotive sector. For demanding components that will be produced in high quantities, MAPAL presents different machining levels: Basic, Performance and Expert. The new classification describes the different machining solutions depending on the quality requirements, number of units and investment. The Performance Line is aimed at series production and focuses on machining with special tools. It is mainly used when new components are to be produced efficiently and economically on existing systems.

FaceMill-Diamond-ES and NeoMill-T-Finish increase economic efficiency in aluminium milling

MAPAL is expanding its aluminium milling programme with two new products. The FaceMill-Diamond-ES is a versatile all-rounder that ensures high economic efficiency and sustainable process reliability in demanding production conditions with smaller quantities and changing component types.

The indexable insert milling cutters of the new NeoMill-T-Finish series provide a significant increase in the economy and efficiency of finish machining in series production. The finish milling cutter with exchangeable inserts functions according to the plug & play principle: customers change the inserts directly on site without having to adjust them afterwards. In addition, this also means that fewer tool bodies have to be kept in stock. What makes the new milling cutter unique is a patent-pending system of insert arrangement, which results in a homogeneous wear pattern of the cutting edges, longer tool life and thus a low cost per part.

Titanium milling: NeoMill-2-HiFeed90 + OptiMill-Tro-Titan

The tool programme for titanium machining is expanded by two efficient milling tools. The five-edged trochoidal milling cutter OptiMill-Tro-Titan is characterised by maximum metal removal rate and shines with excellent surfaces due to unequal spacing and unequal pitch of the cutting edges. It is designed for trochoidal milling in partial cutting, trimming and for cutting depths up to 3xD. The new radial insert milling cutter NeoMill-4-HiFeed90 will be available as an end mill, screw-in milling cutter and milling cutter head from January 2023. The universally applicable high feed milling cutter stands for high productivity and is characterised by the highest stock removal rates, very high feed rates and large chip depths.

Captions:

Pic 1: Siegfried Wendel, Chief Sales Officer at MAPAL. ©MAPAL

Pic 2: The new HP016 and HP018 cutting materials from MAPAL are specially designed for the particular requirements of reaming and fine boring high-alloy and stainless steels as well as cast steel and hardened steel. ©MAPAL

Pic 3: The "Performance" tool package for machining stator housings for electric motors is optimised for medium production quantities. The picture shows the machining solution with HSK-63. ©MAPAL

Short profile MAPAL Dr. Kress KG

MAPAL – tooling the customer's success

MAPAL Präzisionswerkzeuge Dr. Kress KG is one of the leading international suppliers of precision tools for the machining of practically all materials. The company founded in 1950 supplies leading customers from the automotive and aerospace industries and from machine and plant engineering. With its innovations the family-owned company sets trends and standards in production and machining technology. MAPAL sees itself as a technology partner, supporting its customers with the development of efficient and resource-conserving machining processes using individual tool concepts. The company is represented with production facilities, sales subsidiaries and representatives in 44 countries worldwide. The MAPAL Group generated sales of EUR 524 million in 2021 and has around 5,000 employees.

12/08/2022

Enquire about this StoryReturn to News Overviews
The Manufacturers Success ConnectionLantek Sheet Metal SolutionsMitsuiseiki.comCGTech VERICUTThe Reshoring Initiative

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

CG Tech USA bannerJobs advertAbsolutemachine.comMitsui Seikidgs Marketing Engineers

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree