Blue Photon Adhesive Workholding Technology

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Blue Photon Adhesive Workholding Technology

Product Description:

Blue Photon grippers and BlueGrip™ workholding adhesive products are designed to simplify how parts are loaded to reduce scrap and increase spindle up-time. Hard-to-hold additive parts for post-processing are particularly suited to Blue Photon’s adhesive workholding technology.

Product Detail:

Blue Photon’s patented grippers are load bearing and light transmitting fixture components inserted into an insert and fixturing system which supplies up to 605 lbs of tensile holding power each. The process involves applying proprietary BlueGrip™ workholding adhesive to the grippers and curing through the grippers with ultraviolet light for 60 seconds. By using grippers, and eliminating clamps on top of the part, exceptional cutting tool access is achieved. The part de-bonds with a ¼ turn twist of the gripper or hot water soak. Residual adhesive is simply removed by the application with pressurized steam or hot water, and a light peeling action. Any part that is at risk of distortion from traditional clamping or pose complications in fixture design are a potential candidate for the workholding technology.

19/08/2022

Enquire about this StoryReturn to News Overviews
GF Machining SolutionsMitsuiseiki.comThe Reshoring InitiativeLantek Sheet Metal SolutionsCGTech VERICUT

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Absolutemachine.comJobs advertMitsui SeikiCG Tech USA banner

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree