OGP Grows Multisensor CMM Lineup with New Large Format FlexPoint 12-Series

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

OGP Grows Multisensor CMM Lineup with New Large Format FlexPoint 12-Series

Made for large, heavy parts with complex dimensions and tolerances, FlexPoint 12-Series measures volumes up to 1200 x 3000 x 1000 mm. The VersaFlex™ multisensor head is a patented sensor array that offers up to three simultaneously available sensors on one articulating head: OGP SmartProbe® fully telecentric optical video probe, SP25 scanning probe, and the interferometric laser TeleStar® Probe.

“CAD programmable articulation of the VersaFlex creates optimum positioning and alignment of all sensors to increase measurement efficiencies and throughput,” said Jim Stern, Director of Applications Engineering at OGP. “FlexPoint CMMs introduce real ROI opportunities by eliminating time-consuming tooling changes and constant recalibration during measurement routines, while consolidating the need for multiple metrology systems into one multisensor CMM.”

FlexPoint 12-Series systems expand the volume range of the family, offering solutions from 700 x 700 x 600 mm to 1200 x 3000 x 1000 mm. All FlexPoint systems are powered by ZONE3®, the world’s most comprehensive metrology software.

26/09/2022

Enquire about this StoryReturn to News Overviews

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

GF Machining SolutionsRainford PrecisionCGTech VERICUTThe Reshoring InitiativeLantek Sheet Metal Solutions

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

CG Tech USA bannerJobs advertMitsui SeikiAbsolutemachine.com

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree