OPEN MIND presents hyperMILL® at the Formnext exhibition and conference:

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

OPEN MIND presents hyperMILL® at the Formnext exhibition and conference:

AM and post-processing are both essential for additive manufacturing, which is why OPEN MIND will be on hand as an exhibitor from 15 to 18 November 2022 at Formnext 2022. OPEN MIND will be showcasing its hyperMILL® ADDITIVE Manufacturing CAD/CAM solution along with hyperMILL® BEST FIT, which offers an innovative way to use a digital twin.

hyperMILL® ADDITIVE Manufacturing opens up the flexible options available with highly complex 5-axis simultaneous machining to direct energy deposition (DED) and wire arc additive manufacturing (WAAM). The application of material can be easily programmed using OPEN MIND’s software that can be automatically simulated to avoid collisions. hyperMILL® can also be used to tap the potential of powder bed fusion (PBF), another additive manufacturing process. Additionally, post-processing and the removal of support structures in 5-axis machining can also be programmed in hyperMILL®.

The virtual world is adapting to the real world

Aside from the special case of hybrid machines, where additive and subtractive manufacturing are carried out in subsequent steps, only minimal alignment of a nearly finished part in the machine tool is required for remachining. OPEN MIND’s hyperMILL® BEST FIT revolutionizes this step to prepare for machining. Instead of having to manually align the clamped stock to the NC program using a dial gauge, control cycles, plus a great deal of sensitivity, the hyperMILL® CAM system automatically aligns the NC program to the component position. Based on the virtual machine in hyperMILL®, this method saves time and increases process reliability. The misaligned stock is probed on the machine by way of a 3D measurement, the measurement log is sent to the CAM system, and hyperMILL® BEST FIT adjusts the NC code to the actual position of the component. The virtual world (programming) is adapted to the real world (clamping), not the other way around! The adjusted NC code is then simulated in the virtual machine on the actual clamping setup and automatically optimized.

Examples at the show

To showcase its additive manufacturing solutions at Formnext, OPEN MIND will be presenting examples from the fields of medical engineering and the aerospace industry.

30/09/2022

Enquire about this StoryReturn to News Overviews
The Manufacturers Success ConnectionLantek Sheet Metal SolutionsCGTech VERICUTXYZ Machine ToolsMitsuiseiki.com

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Absolutemachine.comMitsui SeikiCG Tech USA bannerJobs advert

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree