Exciting Southern Manufacturing Line-Up from ITCExciting Southern Manufacturing Line-Up from ITCExciting Southern Manufacturing Line-Up from ITC

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Exciting Southern Manufacturing Line-Up from ITC

At the 2023 Southern Manufacturing show on stand H250, Industrial Tooling Corporation (ITC) will be introducing a host of product lines from its extensive cutting tool portfolio. From the 7th to 9th of February at the Farnborough International Exhibition Centre, the UK manufacturer will demonstrate its latest innovations and inviting show visitors to buy British manufactured cutting tools.

ITC has an outstanding reputation for the quality, consistency and performance of its solid carbide end mills, drills and thread milling ranges. At Farnborough, ITC engineers will be on-hand to discuss the latest product lines that can boost productivity for manufacturers. Alongside the very impressive UK manufactured ITC standard and special product lines that are available on short lead times, the company will also present the most recent technologies available from WIDIA and BIG KAISER.

One ITC product on show will be the 6054 Series of end mill developed specifically for the machining of steel and exotic material types. The geometry of the 6054 Series has a centre-cutting geometry with harmonic fluting to maximise material removal rates and swarf evacuation whilst minimising vibration to enhance surface finishes and tool life. This performance is further enhanced with a shallow chip gullet that guarantees exceptional core strength for high material removal rates and stability. Complementing this is the polished harmonic flutes, Cupro coating and chip breaker that evacuates swarf at an extraordinary rate.

The 6-flute series 6054 Series is available with diameter options of 6, 8, 10, 12, 16 and 20mm with a length of cut from 18mm on the 6mm diameter tool through to 60mm on the 20mm diameter end mills. Complementing the UK manufactured ITC product lines will be products from the WIDIA range. ITC will present the latest WIDIA™ M1600 face mill series. Suitable for roughing to semi-finishing operations in steel, stainless steel, cast iron and nodular iron materials, this series has 16-cutting edges and a smart insert design that performs exceptionally well under various machining conditions including low-power machines, unstable, non-rigid setups, long overhangs and weak fixture conditions.

The 16-edged, precision-ground insert with a positive geometry enables low cutting forces and low power consumption resulting in higher tool life and an excellent cost per edge. The M1600 has one universal insert geometry in three versatile grades: WP35CM, WK15CM and WU20PM. Alongside the M1600 will be the impressive M8065HD milling system for machining steel and cast-iron materials. Designed with eight cutting edges and extra-wide chip gashes, the new M8065HD can achieve deep depths of cuts while producing high metal removal rates during face and shoulder milling applications.

Adding to ITC’s unparalleled drilling line at Southern Manufacturing will be the expanded range of indexable inserts added to the Widia TOP DRILL™ TDMX modular drilling line. The Widia TDMX Modular X drilling line is the ultimate choice for demanding drilling applications and the new MS geometry delivers stable modular drilling for general engineering and energy applications on steel and stainless steel.

From the BIG KAISER stable, ITC will showcase the expanded line-up of Smart Damper-equipped, arbour-style face mill holders that support face mills with diameters of 80mm or 100mm with an arbour pilot diameter of 27mm. The Model SDF57 assembly has an outside diameter of 71.8mm and allows users of 75mm face mills to access up to 500mm of reach, the longest tool assembly in the industry using standard components. Also from BIG KAISER will be the Mega Synchro Tapping Chuck. The innovative tapping chuck has a special function built-in to compensate for synchronisation errors that may occur during rigid tapping. For information on these latest products or to find out more about the UK manufactured ITC product lines, come and visit us at Farnborough on Stand H250 from the 7th to the 9th of February.

29/11/2022

Enquire about this StoryGo to Supplier's WebsiteReturn to News Overviews
GF Machining SolutionsMitsuiseiki.comLantek Sheet Metal SolutionsCGTech VERICUTXYZ Machine Tools

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Jobs advertAbsolutemachine.comMitsui SeikiCG Tech USA banner

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree