REGO-FIX to Spotlight Popular reCool and powRgrip Product Lines at EASTEC

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

REGO-FIX to Spotlight Popular reCool and powRgrip Product Lines at EASTEC

The REGO-FIX reCool® retrofittable coolant-through system and the company’s powRgrip tool holders will take center stage during EASTEC 2023. Both hugely popular in the manufacturing industry, reCool cost-effectively converts existing flood-cooled driven tools on turning machines to through-tool-coolant capable in as little as two minutes, while the powRgrip high-precision tool holding system generates extremely high clamping forces equal to or higher than shrink-fit holders.

REGO-FIX developed its innovative reCool® system as an alternative to expensive, high-maintenance through-coolant-dedicated live tooling heads. The reCool system gets coolant to the cutting edge much more effectively than spray piping or nozzles, easily removing heat from the cutting zone and contributing to better surface finishes, longer tool life, improved chip control and increased productivity. Any standard ER collet works with the reCool system, which accommodates collet sizes from ER 16 through ER 40 while handling maximum cutting speeds of 12,000 rpm and delivering coolant pressures up to 2,000 psi.

EASTEC show attendees will experience how the safe, precise and cost-effective powRgrip system, which includes a holder, collet and mounting unit, generates six tons of force. The system relies on the interference between holder and collet to generate its clamping force.

Unlike other clamping systems where heat or hydraulics are used to expand the material, the powRgrip uses the mechanical properties of the holder material to generate tremendous gripping force with run-out below 0.0001”. Interchangeable collets are available from 1/8" up to 1", including metric sizes, and will hold both carbide and HSS tools.

Designed for easy operation and use, the powRgrip system takes less than 10 seconds to press in a tool or remove it from the holder. Because no heat is used, tools can be used immediately after a tool change. Cycle testing exceeded over 20,000 insertions and removals, outperforming other systems on the market.

23/02/2023

Enquire about this StoryReturn to News Overviews

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

GF Machining SolutionsThe Reshoring InitiativeRainford PrecisionLantek Sheet Metal SolutionsCGTech VERICUT

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

CG Tech USA bannerAbsolutemachine.comMitsui SeikiJobs advert

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree