The World's Strongest and Most Reliable Clamping System

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

The World's Strongest and Most Reliable Clamping System

Sync your workholding with your machine for ultimate spindle uptime today! Set up changes are reduced by 90% with this fast, extremely accurate quick change, workholding, and positioning system. Infinite combinations are possible as any workholding can be mounted on top, from a standard vise to a custom fixture, for a reliable and consistent changeover.


For a micron-precise connection between machine table and workpiece, the VERO-S clamping system makes optimal use of even the smallest machine table. Combine with the comprehensive SCHUNK stationary workholding range or your existing workholding to find the solution to your clamping needs. VERO-S quick-change pallet system delivers fast and precise resetting of workpieces, clamping devices and other equipment on 3, 4, or 5-axis machining centers.


Workpieces can be directly clamped and machined from five sides without restricting accessibility. This is done by screwing the clamping pins of the Quick-Change Pallet System directly into the workpiece. The components are then quickly exchanged in the machine, positioned, fixed, and clamped all in one step with a repeat accuracy of less than 0.005 mm. The clamping height of the workpieces can be adjusted with module height extensions, so the machine spindle can reach all five sides of the workpiece without any special tools.


06/07/2016

Enquire about this StoryReturn to News Overviews

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

GF Machining SolutionsXYZ Machine ToolsMitsuiseiki.comCGTech VERICUTLantek Sheet Metal Solutions

Horn Cutting Tools

Horn Cutting Tools Tübingen, Germany, Grooving, Milling, Broaching, Drilling, Special Tools

Mitsui SeikiJobs advertAbsolutemachine.comCG Tech USA banner

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

Kennametal

Productivity+™ Active Editor Pro - An introduction

A series of video tutorials on how-to program Productivity+ software from importing a CAD model to measuring a part.

Kennametal

Technology integration on DMC 65 H monoBLOCK FD

Machining of an aircraft rim with the technology integration Milling, Turning and Roller Burnishing on a DMC 65 H monoBLOCK with Integrated process analytics.

M4SNews.com website uses cookies to ensure you get the best experience, as detailed in our Agree