Terms and conditions

Please read these terms and conditions carefully before using the M4SNews web site (the 'site'). Access and use of the site means that you agree with, and are bound by them. If you disagree with them, you may not use the site.

We may occasionally update these terms and conditions, so please check them regularly for changes. Continued use of the site after the changes have been implemented means that you have accepted them. If you do not agree with the changes, you must stop using the site.

M4SNews reserves the right to suspend and/or withdraw access to any or all of the site pages at any time, and accepts no responsibility for the non-availability of these pages. Similarly, there is no warranty that defects will be corrected, or that the site or its server is free from viruses or other errors.

Any hyperlinks to other sites are provided for information only, and should not be taken as a recommendation or endorsement of such sites. Use of these links is entirely at your own risk. If you want to link to the M4SNews site, you will need our permission. Please contact us on ++44 (0)1594 542578

Copyright/use of content : site users acknowledge and agree that all rights, including copyright, database and other intellectual property rights in this site, as well as graphics, logos, underlying source codes and software, are owned by, or licensed to, M4SNews, or used by M4SNews in accordance with the relevant laws. Access to the site is permitted for your own, or your employer's use within the company, but not for any commercial purposes. You may print a single hard copy of part of the site for your personal use, otherwise you undertake not to copy, store in any medium (including in any other website), distribute, transmit, re-transmit, broadcast, modify or show in public any part of the Site or its content without the written permission of M4SNews, or in accordance with the Copyright, Designs and Patents Act 1988.

Company names and trade marks may be used on this site when referring to specific companies or their products.

Site use : use of this site is subject to you accepting these terms and conditions. You must only use it for lawful purposes, and not in such a way as to restrict the rights or enjoyment of the site by any third party. You must not import or transfer to the site, either directly or indirectly, any information or content which is, or may be, inaccurate, misleading, defamatory, obscene or offensive or in breach of any intellectual property right or similar right or damaging to the software or performance of this site. Similarly, you accept this responsibility on behalf of any other person using your terminal, and indemnify machines4sale in respect of any and all losses, costs or damages including reasonable legal fees incurred by machines4sale in relation to or arising out any breach of these terms and conditions.

Disclaimer : Machines4sale Ltd, the owner of M4SNews, takes all reasonable precautions to ensure the accuracy of information on the site, and that there are no factual omissions which would significantly alter the validity of the information. However, there is no warranty given, either express or implied, with regard to the accuracy of information either posted on, or downloaded from, the M4SNews site. This information is intended for general information purposes only, and you are responsible for checking the accuracy of any details contained on the site. NB The views expressed by contributors, in articles and advertisements, are their own, and do not necessarily represent those of M4SNews.

Privacy policy : M4SNews will collect information about companies and individuals primarily but not exclusively in the engineering sector, which may include name, telephone number, email, address, job function and industry sector. Information may come from IP addresses, cookies and from third parties. The information will be used for our legitimate interests in publishing and disseminating manufacturing news, the legitimate interests of our customers and the legitimate interests of the manufacturing industry. M4SNews’s aim is to help industry to be more efficient through supplying technical and business intelligence. Data will also be used to comply with legal obligations. You have the right to request details of the information we hold about you from M4SNews by emailing team@machines4sale.com. You also have the right to have your data removed from our records. We will only share information with employees and editorial partners of M4SNews wherever they are located. In addition, we may share the information with professional advisors, law enforcement agencies, email service providers and any third party to which we transfer all or the majority of our assets.

Limitation of Liability: M4SNews does not accept any responsibility for any losses or damages whatsoever including, without limitation, direct, indirect, special or consequential loss or damage and/or loss of profits, business revenue, goodwill or anticipated savings arising out of access to or use of or reliance on or inability to access any information posted on the site, or any hypertext or hyperlink to a web site or any information contained on or accessed through such web site.

Submitted material: You may submit material for publication on parts of the M4SNews site. We accept no liability in respect of any material submitted by users and published by us and we are not responsible for its content and accuracy. If you want to submit material to M4SNews for publication on the site, you may do so on the following terms and conditions: 1. M4SNews may publish and make available to the public by any means any material that you submit, post, upload, email or otherwise transmit to them or to the site at their sole discretion and they shall be entitled to make additions or deletions to any such material prior to publication. 2. You hereby grant M4SNews a non-exclusive, royalty-free, perpetual and worldwide licence to republish any material you submit, post, upload, email or otherwise transmit to them or to the site in any format, including without limitation print and electronic format. 3. You hereby waive all of the moral rights that you have under Chapter IV of the Copyright, Design and Patents Act 1988 in respect of any material you submit, post, upload, email or otherwise transmit to M4SNews or to the site. 4. Publication of any material you submit to us will be at M4SNews’s sole discretion. M4SNews reserves the right to make additions or deletions to the text or graphics prior to publication, or to refuse publication 5. You warrant to M4SNews that any material you submit to the site is your own original work and that you own the copyright and any other relevant rights.

These terms and conditions, as well as your use of the machines4sale site, are governed by English law. Any disputes arising out of them shall be subject to the exclusive jurisdiction of the English courts.

Who we are: M4SNews.com is owned by Machines4sale Ltd. Registered office : Knockalls Farm, Mitcheldean, Gloucestershire, GL17 0DP UK. Tel 01594 542578 email team@machines4sale.com

DMG MORI Pfronten Event 2021

5 Axis Machining: Panther | HAIMER | CAM-Software | hyperMILL

The Panther Project is the best example of successful Teamwork! Together, HAIMER and OPEN MIND demonstrate how complex milling operations can be mastered in a powerful and dynamic way!

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

DMG MORI Manufacturing USA Image film

DMG MORI Manufacturing USA is DMG MORI’s hub for American manufacturing and automation solutions. Located in Davis, CA, this state-of-the-art manufacturing facility features the latest automation technology and some of the brightest minds in the machine tool industry.

XYZ Machine ToolsMitsuiseiki.comThe Reshoring InitiativeCGTech VERICUTLantek Sheet Metal Solutions
DMG MORI Pfronten Event 2021Widia mobileWidiaMitsui SeikiJobs advertCG Tech USA bannerAbsolutemachine.com

Milling Titanium Ti6Al-4V with 8 cutting edges per insert!

Up to 8 cutting edges per insert. That’s helical milling at the lowest possible cost-per-edge. HARVI Ultra 8X helical milling cutters are designed to deliver the highest metal removal rates (MRR), especially in high-temperature alloys (Titanium).

HPR Drill

5 Axis Machining: Panther | HAIMER | CAM-Software | hyperMILL

The Panther Project is the best example of successful Teamwork! Together, HAIMER and OPEN MIND demonstrate how complex milling operations can be mastered in a powerful and dynamic way!

HPR Drill

DMG MORI Manufacturing USA Image film

DMG MORI Manufacturing USA is DMG MORI’s hub for American manufacturing and automation solutions. Located in Davis, CA, this state-of-the-art manufacturing facility features the latest automation technology and some of the brightest minds in the machine tool industry.

Machines4sale Ltd website uses cookies to ensure you get the best experience, as detailed in our Agree