United Machining UK announces the Agie Charmilles CUT S wire EDM range
United Machining UK has announced the Agie Charmilles CUT S wire EDM range for UK users. The three-model line covers the CUT S 400, 600 and 800, with mechanical TETRAX taper design, patented collision protection and Spark Track wire technologies. Agie Charmilles states the series can produce parts free from copper contamination, removing cleaning steps from semiconductor component processing.
United Machining UK has announced the Agie Charmilles CUT S wire EDM range for UK production floors.
The machines run on Agie Charmilles' Intelligent Power Generator, a resonance-circuit unit the manufacturer says cuts heat output and interference from long cable routes. A mechanical TETRAX design carries taper work, backed by a patented collision protection system.
On the CUT S 400, travel is 405 x 315 x 256 mm on X, Y and Z, and 500 x 350 mm on U and V. Taper runs to 45 degrees as an option, and the symmetrical layout suits flexible automation.
The claim carrying most interest is wire quality. Agie Charmilles states the range will be the first EDM machines able to produce parts free from copper contamination, using a new patented wire that lets semiconductor component makers drop cleaning steps.
Frequently asked questions
What is the Agie Charmilles CUT S series?
The CUT S series is Agie Charmilles' current wire EDM range, comprising the CUT S 400, the CUT S 600 and the CUT S 800. The three machines share a common platform: the Intelligent Power Generator, the UNIQUA control interface and Spark Track wire handling, with the mechanical TETRAX design for taper work and a patented collision protection system across the range. United Machining UK announced the series for UK production floors in November 2026, following its presentation at EMO Hannover in September 2025.
Which CUT S models are covered by the announcement?
United Machining UK has announced three wire EDM models: the CUT S 400, the CUT S 600 and the CUT S 800. The CUT S 400 is the most compact, with X, Y and Z travel of 405 x 315 x 256 mm and U and V travel of 500 x 350 mm, taking wire from 0.05 to 0.33 mm. The larger CUT S 600 and CUT S 800 extend the working envelope for bigger workpieces, with the same platform, taper capability and automation options underneath.
How does the CUT S range address copper contamination?
Agie Charmilles states the CUT S series will be the first EDM machines able to produce parts free from copper contamination, using a new patented wire and an updated process technology. That matters in semiconductor component processing, where parts normally need cleaning after wire EDM to remove copper residue. The manufacturer says the change removes that cleaning work and shortens lead times. Its certified wire programme already includes the AC CUT ZEROCU contamination-free wire.
What does the Intelligent Power Generator change?
The Intelligent Power Generator is Agie Charmilles' discharge power supply for the CUT S machines. The manufacturer describes it as a resonance circuit unit that delivers clean, repeatable pulses while cutting heat emission at the work area, which is why the generator can sit close to that work area. The same generator runs across the wider wire EDM portfolio, with the UNIQUA interface giving a consistent operator workflow between models.
What are the working envelope and wire diameter of the CUT S 400?
The CUT S 400 travels 405 x 315 x 256 mm on X, Y and Z, with 500 x 350 mm on U and V, giving a taper height of 30 mm as standard and 256 mm with the 45 degree option. It accepts wire from 0.05 to 0.33 mm, takes workpieces up to 800 x 600 x 250 mm and carries a maximum workpiece weight of 1000 kg. The machine measures 2060 x 2920 x 2345 mm and weighs 6500 kg including dielectric.
Does the CUT S range support taper cutting and automation?
Yes on both counts. The mechanical TETRAX design across the S series is built for taper machining, and the CUT S 400 is available with a 45 degree taper option. The symmetrical machine layout improves access to the working area and leaves space for flexible automation around the machine, with a new collision protection system working alongside Spark Track technologies such as ISPS and iWire.
