Cutlite's FHD 4030 produced cut, bevelled and drilled parts in one cycle.
Cutlite demonstrated the FHD 4030 at EuroBLECH, where visitors selected an 8 metre bed with integrated bevel cutting and drilling. Parts emerged cut, bevelled and drilled, ready for welding. The in-house EVO 4 source reached 60 kW, while at FABTECH workshops asked about cutting times and edge quality. Hundreds of companies visited, with many new sales contacts.
EuroBLECH visitors favoured the Hannover setup built around an 8 metre bed.
Parts left ready for welding. The two-bridge arrangement integrated bevel cutting and drilling on the same bed. At maximum power, the FHD 4030 cuts Hardox 100 mm in oxygen. Its in-house EVO 4 source drives that performance. The island stand hosted demonstrations of both operations.
At FABTECH in Las Vegas, plasma-cutting workshops asked about cutting times and edge quality, with FHD presented as an alternative. Hundreds of companies visited the stand, with many new sales contacts. LAMIERA follows in Milano, 11 to 14 May 2027.
Frequently asked questions
What cutting capacities and material thicknesses can the FHD 4030 handle at 60 kW?
The FHD 4030 uses Cutlite’s in-house EVO 4 source, rated for up to 60 kW and 25 bar. At 60 kW, it cuts Hardox from 100 mm down to 70 mm in oxygen, Hardox from 25 mm to 40 mm in mixed gas, stainless steel from 20 mm to 50 mm in nitrogen, and carbon steel up to 30 mm in mixed gas. Its oxygen-cutting coverage for carbon steel includes 15 mm, 20 mm, 30 mm, and 50 mm.
What equipment and demonstrations are planned for Cutlite’s shows in Hannover and Las Vegas?
At EuroBLECH 2026 in Hannover, Cutlite will present the FHD 4030 from a Hall 13 island stand, including a large-format machine with two bridges on an 8 metre bed. Matteo Biagini, Marco Scalzo, and Olaf Heiseler will set up the stand, while Gabriele Trafficante and Lucio Verdi conduct demonstrations. At FABTECH 2026 in Las Vegas, the company will show an FHD system focused on large-format, high-power plasma cutting and bevel-cutting capabilities.
How will the cutting times and edge-quality questions raised at FABTECH translate into production gains?
Plasma-cutting workshops at FABTECH are asking about cutting times for 100 mm material and the resulting edge quality, with FHD presented as an alternative. No workshop test results, measured cutting times, edge-quality assessments, or calculated production gains are provided. The related 8 metre configuration is described as producing cut, bevelled, and drilled parts in one cycle, ready for welding.
Which Hardox, stainless-steel, and carbon-steel thicknesses are listed for the 50 kW system?
The 50 kW FHD shown at Las Vegas is listed as cutting Hardox at 100 mm, 75 mm, and 50 mm in oxygen, plus Hardox at 50 mm in mixed gas. It also handles carbon steel at 25 mm, 20 mm, and 12 mm in mixed gas. Unlike the 60 kW FHD 4030 specifications, the passage does not list a stainless-steel cutting capacity for the 50 kW configuration.
How does the integrated 8 metre platform prepare parts for welding?
The highlighted machine has two bridges mounted on one 8 metre bed, combining cutting, bevel cutting, and drilling in a single cycle. This integrated workflow leaves parts cut, bevelled, and drilled before they move to welding. The display is aimed at large-format, high-power processing, while subsequent Prato demonstrations are planned using customer materials, thicknesses, and formats with parameters tailored to those requirements.
Which products are featured at the Las Vegas display besides the cutting systems?
The Las Vegas display also features Tuscan food products: Podere Allocco wine and Tenuta Morgiano extra-virgin olive oil. They represent Tuscany alongside Cutlite’s FHD equipment and plasma-cutting demonstrations. The passage does not specify individual wine varieties, olive-oil varieties, labels, quantities, or availability at the stand.
Get the long read at Cutlite Penta Srl
Is this your company?
This article features your business. Claim it to add your logo, contact details, and a link to your website — or upgrade to reach more buyers.
Did you know 80% of Press Releases trigger AI content warnings? Reach out and the M4S team can assist.