GW Martin bought two Miyano BNE-65MYY turning centres from Citizen Machinery UK in March 2026.

Citizen Machinery UK supplied two Miyano BNE-65MYY turning centres to GW Martin in March 2026, taking its count of these bar-fed, twin-spindle machines to five. Trials showed lower tooling costs from better vibration resistance, 30 percent faster production of a stainless steel spigot housing, and a six-fold scrap reduction to 5 percent.

The Eastleigh subcontractor installed the twin-turret, 65 mm bar capacity lathes after production trials at Citizen Machinery UK's turning technical centre in Brierley Hill.

Trials on two nearly-identical mild steel components found the BNE turn-milling platform optimal for producing the pair. Superior vibration resistance lowered tooling costs, as significantly fewer cutters were needed to complete a given quantity of parts.

On the second BNE-65MYY, a 316 stainless steel spigot housing ran 30 percent faster and scrap fell six-fold to 5 percent. Cycle time on one component dropped from 302 to 200 seconds.

Frequently asked questions

How did the Miyano BNE-65MYY change cycle time and tooling costs for GW Martin’s mild steel components?

The more complex, tightly toleranced part was produced in approximately the same cycle time as on GW Martin’s other twin-turret lathe, while the Miyano’s better vibration resistance reduced tooling costs because fewer cutters were needed for a given quantity. On the second part, cycle time fell from 302 to 200 seconds, raising productivity by 50 percent. The machine also made the required accuracy easier to achieve.

What production benefits did GW Martin achieve on the three components run on its second BNE-65MYY between March and July 2026?

The first component was completed in 3.5 minutes instead of 5.5 minutes, making it more than one third faster. A 316 stainless steel spigot housing was produced 30 percent faster, while its scrap rate fell sixfold to 5 percent. The third component ran in half the time of an earlier-generation ABX Miyano from 2007. The second machine also provided redundancy and flexible work allocation.

How might the two new Miyano lathes affect GW Martin’s future growth in precision subcontract manufacturing?

The purchases strengthen GW Martin’s capacity and operational resilience by adding a dedicated machine for mild steel work, backup for the first BNE, and flexibility to reassign components. Greater output on reassigned parts has already shortened customer delivery lead times. GW Martin also intends to pursue more aerospace contracts, with AS9100 certification expected before the end of 2026, and plans to use superimposed machining for suitable work.

What configuration does the BNE-65MYY use for turning and milling operations?

The BNE-65MYY is a 10-axis, 65 mm-capacity bar-fed turning centre with two live 12-station turrets. Both turrets have Y-axis movement, allowing a sub-spindle and main spindle to work together within the platform’s superimposed-machining function. Citizen says this arrangement can place three tools in cut at once by coordinating the main and sub-spindle operations.

How does superimposed machining expand the effective capability of the Miyano platform?

The Mitsubishi control can simulate a three-turret turning centre by letting a component held in the two-axis sub-spindle follow the movement of the upper turret while the main spindle machines the component. This means tools on the reverse side of the turret can engage a part after it has been parted off, allowing three tools to cut simultaneously. GW Martin plans to use the function once implemented in its aerospace and other production work.

What investment and energy measures form part of GW Martin’s factory modernisation programme?

GW Martin has invested more than £3 million over five years in new production and inspection equipment, replacement flooring and lighting, a new roof, and a training studio containing a CNC lathe, mill, and 3D printer. Solar power meets 30 percent of annual electricity demand, and the company buys only renewable electricity through the grid, allowing its 25,000-square-foot Eastleigh factory to operate on a net-zero basis.

Get the long read at Citizen Machinery UK Ltd

SM

Simon Morton

Editor, M4SNews

With a background in heavy engineering, process engineering, digital marketing & AI. My mission, to cut through the news and make it easy to digest.

M4SNews marks eighteen years of independent operation, connecting manufacturers and engineers with the intelligence that actually matters on the factory floor.

Is this your company?

This article features your business. Claim it to add your logo, contact details, and a link to your website — or upgrade to reach more buyers.

Did you know 80% of Press Releases trigger AI content warnings? Reach out and the M4S team can assist.