Ten machines, over 100 visitors, one day.
Mills CNC put ten multi-tasking machine tools through their paces at its Innovation Day in Leamington Spa, with over 100 visitors attending. The Heller HF 5500 FLEX, a horizontal simultaneous 5-axis mill-turn, machined a large complex aerospace blisk from solid.
Ten DN Solutions multi-tasking machine tools were under demonstration at the company's Technology Campus in Leamington Spa, including two DVF 4000 simultaneous 5-axis machining centres and a DNX 2100S mill-turn.
Mills' low-volume, high-mix T4 series and SYNERGi automation systems were alongside them, and Heller UK general manager Tom Hughes gave the keynote. The HF 5500 FLEX is a horizontal simultaneous 5-axis mill-turn with an HSK-T spindle rated at 45kW, 12,000rpm and 400N-m, a 630mm rotary tilting table and a 50-tool ATC.
It has no integrated pallet changer. Workpiece setup is direct, and the machine can be tied into external linear or rotary pallet systems. The machine ran a large complex aerospace blisk from solid throughout the event, and is already in use by aerospace, automotive and power generation component manufacturers.
Tony Dale, Mills CNC group CEO, said the Heller and the DN Solutions machines drew the most attention, and that the company is following up every enquiry. He expects many to become sales over the next few weeks and months.
Frequently asked questions
Ten machine tools under demonstration, and over 100 engineers through the door. What were they actually looking at?
Ten DN Solutions multi-tasking machine tools running live demonstrations, alongside Mills' own low-volume, high-mix T4 series and SYNERGi automation systems, and the Heller HF 5500 FLEX horizontal simultaneous 5-axis mill-turn. Tony Dale, Mills CNC group CEO, said the Heller and the DN Solutions machines - including two DVF 4000 simultaneous 5-axis machining centres and a DNX 2100S mill-turn - drew the most attention and were the technology stars of the show. Heller UK general manager Tom Hughes gave the keynote from the centre stage, covering the Heller brand and the HF 5500 FLEX in detail.
The HF 5500 FLEX machined a blisk from solid. Which part of a 5-axis mill-turn makes that difficult?
A blisk is a complex aerospace component with blades on a single disc, and the source does not break down which feature of the machine made it difficult. What the source does establish is the configuration it had to work with: an HSK-T mill-turn spindle rated at 45kW, 12,000rpm and 400N-m, a 630mm x 630mm rotary tilting table, and a 50-tool position ATC on a horizontal simultaneous 5-axis machine. The simultaneous axis configuration - five axes moving at once - is what allows a single setup to reach both faces of a blisk without re-fixturing. Mills says the machine is already in use by aerospace, automotive and power generation component manufacturers.
What does the FLEX designation mean, and why is there no pallet changer?
It refers to the table loading configuration. Unlike some other Heller models, the HF 5500 FLEX is built without an integrated pallet changer. Instead it offers two things: fast and flexible table loading access with direct workpiece setup, and the ability to integrate with external linear or rotary pallet systems for increased productivity. The machine on show was fitted with a Siemens SINUMERIK ONE control and a 24-inch multi-touch screen.
When and where was the event held?
The Innovation Day technology event was held at the Mills CNC Technology Campus facility in Leamington Spa on Thursday 8 October 2026. It was a one-day event, and over 100 visitors attended.
What happens to the enquiries from the event?
Mills CNC is following up every lead and enquiry. Tony Dale said he is confident that many of them will be turned into actual sales over the next few weeks and months. He also noted that the event was a success with 100-plus visitors attending.
