Pumps and compressors for chemically broken-down plastic.

Sundyne has 75 years supplying rotating equipment to hydrocarbon processing plants and is now applying that range to advanced recycling, where plastic is broken down chemically or thermally rather than mechanically. The line-up covers pumps and compressors: diaphragm and integrally geared units for gas, low flow-high head, sealless and centrifugal pumps for liquid duties. Gasification runs at 500 to 1,300C, pyrolysis at 300 to 900C, depolymerisation on PET waste.

The choice of process is driven by the plastic waste feedstock and the end product wanted. Gasification breaks plastic down at 500 to 1,300C in the presence of oxygen or steam to make syngas. Pyrolysis runs at 300 to 900C with little or no oxygen to make pyrolysis oil. Depolymerisation uses chemical treatment, typically on PET waste, to recover monomers - the reverse of polymerisation.

The choice of process is driven by the plastic waste feedstock and the end product wanted. Gasification breaks plastic down at 500 to 1,300C in the presence of oxygen or steam to make syngas. Pyrolysis runs at 300 to 900C with little or no oxygen to make pyrolysis oil. Depolymerisation uses chemical treatment, typically on PET waste, to recover monomers - the reverse of polymerisation.

Sundyne's argument is that these plants need both halves of a rotating equipment package, and that a supplier able to cover both can be a single OEM across the process. The company says it works with technology licensors, EPCs and recycling operators.

PPI diaphragm compressors handle ultra-pure compression of hydrocarbon products and critical gases at small flow rates and high pressures, with no lubrication on the gas side. Sundyne's integrally geared compressors run to API-617 for mission-critical duty, with 5,000 units installed worldwide and up to seven years of continuous operation.

Sundyne LMV pumps use a single high-speed impeller to reach the same head as a multistage pump at synchronous speed, which suits boiler feed water, condensate transfer, solvent circulation and reflux. HMD Kontro metallic and Ansimag ETFE-lined magnetic drive pumps carry harsh and hazardous liquids with no seals or seal support systems. Marelli and Sunflo cover centrifugal and industrial grade low flow-high head duties.

Frequently asked questions

Gasification at 1,300C, pyrolysis at 900C, depolymerisation on PET. Which process is the hardest on a pump seal?

The source does not rank the three processes by severity on a pump seal, so any ranking is an inference rather than something the page confirms. What it does set out is the duty in each case: gasification at 500 to 1,300C in the presence of oxygen or steam to make syngas, pyrolysis at 300 to 900C with little or no oxygen to make pyrolysis oil, and depolymerisation using chemical treatment, typically on PET waste, to recover monomers. Sundyne's stated answer is the equipment line-up rather than a process-by-process seal analysis - sealless magnetic drive pumps for harsh and hazardous liquids with no seals or seal support systems, and diaphragm compressors whose sealed design needs no lubrication on the gas side.

Diaphragm compressors for syngas, integrally geared for process gas. Why does an advanced recycling plant need both?

Because the two halves of the process run on different products and different pressures. The gas side covers syngas from gasification and process gas generally: PPI diaphragm compressors for ultra-pure compression of hydrocarbon products and critical gases at small flow rates and high pressures, with no lubrication on the gas side, and integrally geared compressors built to API-617 for mission-critical duty, with 5,000 units installed worldwide and up to seven years of continuous operation. The liquid side covers the steam, condensate, solvent and monomer duties that go with those processes - low flow-high head LMV pumps, sealless magnetic drive pumps, and conventional centrifugal and industrial grade units.

Why does Sundyne claim to be a single OEM for these plants?

Its stated reasoning is coverage: by supplying both pumps and compressors it can act as a comprehensive OEM for advanced recycling facilities rather than supplying one half of the rotating equipment package. The company says it works with technology licensors, EPCs and recycling companies, and it has 75 years of experience providing rotating equipment to heavy industrial and hydrocarbon processing facilities. That hydrocarbon background is what it points to as the reason its pump and compressor range carries over to these processes.

What size are these plants, and is the plastic actually being recycled at scale?

The source frames the market at a national scale: roughly 400 million tonnes of plastic waste generated each year, with about 85% of plastic used today ending up in landfill and roughly 98% originally made from virgin fossil fuel feedstock, citing the United Nations Environment Programme. Some forecasts suggest that volume could triple by 2050 with economic growth and population growth. The scale of individual advanced recycling plants is not given. On the technology itself, the page notes that advanced recycling expands the types of plastics that can be recovered compared with traditional mechanical recycling, and recovers the molecular building blocks of waste plastic for use as feedstock for new products.

Where do the process flow diagrams come from?

Sundyne publishes a market brochure, the Advanced Recycling Toolkit, which covers where its rotating equipment portfolio fits into advanced recycling process flow diagrams. The company points readers to it for an overview of the portfolio's place in the processes, and for contact details on a project enquiry. The brochure is linked from the source article.

Where can I read the full announcement?

Sundyne's own article sets out how its pumps and compressors are used in advanced recycling, including the market brochure link and the product pages for each line: PPI diaphragm compressors, integrally geared process gas compressors, LMV and HMP pumps, HMD Kontro and Ansimag sealless pumps, Marelli pumps and Sunflo pumps.

The company supplies pumps and compressors and calls itself a single OEM. What does that mean for a plant specifying one process?

The full answer is in the original report. Read it at Sundyne United Kingdom.

Get the long read at Sundyne United Kingdom

SM

Simon Morton

Editor, M4SNews

With a background in heavy engineering, process engineering, digital marketing & AI. My mission, to cut through the news and make it easy to digest.

M4SNews marks eighteen years of independent operation, connecting manufacturers and engineers with the intelligence that actually matters on the factory floor.

Is this your company?

This article features your business. Claim it to add your logo, contact details, and a link to your website — or upgrade to reach more buyers.

Did you know 80% of Press Releases trigger AI content warnings? Reach out and the M4S team can assist.