Royal's MTC-320 covers a packaging job shop's full work range on one spindle.
Royal's 12″ MTC-320 was installed on a Puma 2600 at a rigid plastic packaging manufacturer's R&D job shop. The chuck covers work from 6″ parts down to 1/2″, and changeovers now take 10 minutes or less several times a day. It has had zero issues in nine months and has not come off the spindle.
Regional Manager Matt Block recommended the Royal MTC™ Multi-Tasking Chuck. The shop installed a 12″ MTC-320 on the Puma 2600. The MTC™ covers the shop’s full range of work, from 6″ parts down to 1/2″. Switching functions needs only a quick-change center hub. It uses Royal QG collets.
Since installation, the MTC™ has had zero issues in nine months and has not come off the spindle. The shop now changes over several times a day. The customer reports excellent repeatability with no runout issues, and upkeep is greasing and cleaning at each change.
Frequently asked questions
How significantly has the Royal MTC chuck reduced the time required for changing between different workholding setups on the Puma 2600 lathe?
The installation of the Royal MTC chuck has dramatically reduced changeover times, cutting them from approximately four hours to 10 minutes or less. This improvement allows the shop to switch between large-diameter parts in the 3-jaw chuck and small-diameter parts in collets or the 5C system multiple times a day. This efficiency gain enables them to easily pause longer jobs for expedited parts and then resume the original work without significant delay, ultimately boosting throughput and uptime.
What specific workholding capabilities are integrated into the Royal MTC chuck?
The Royal MTC chuck integrates multiple workholding systems into a single unit. It functions as a 3-jaw chuck for larger parts, a Royal Quick-Grip collet chuck for parts up to 3 inches in diameter, and includes an ID and 5C workholding system. This consolidation allows for the handling of a wide range of part sizes, from 1/2 inch up to 6 inches in diameter, all without needing to remove the chuck from the spindle. The shop can also utilize their existing Royal QG collets and industry-standard base jaws.
What is the process for maintaining the Royal MTC chuck after installation?
Maintenance for the Royal MTC chuck is straightforward and primarily involves basic cleaning and lubrication. The customer performs greasing and cleaning of the chuck at each changeover. This regular upkeep ensures the continued performance and reliability of the workholding system. The chuck has been in place for nine months with zero issues, demonstrating the effectiveness of this simple maintenance routine.
What are the typical part diameter ranges and quantities handled by this R&D job shop?
This R&D site operates as an in-house job shop for a rigid plastic packaging manufacturer, producing mold components and spare parts. The parts they create typically range from 1/2 inch to 6 inches in diameter. Production quantities are generally small, with jobs often consisting of only 6 to 10 pieces. Currently, about 80% of their workload is dedicated to maintenance parts, emphasizing the need for fast turnaround times.
What type of parts does this R&D site manufacture?
This R&D site manufactures mold components and spare parts for the machines used by a rigid plastic packaging manufacturer. These components are essential for the production of bottles used for a variety of products, including spirits, shampoo, and hand sanitizer. The parts are critical for maintaining the operational efficiency and integrity of the bottle production machinery.
What benefits has the customer observed regarding repeatability with the Royal MTC chuck?
The customer has expressed pleasant surprise at the excellent repeatability achieved with the Royal MTC chuck. Even with frequent changeovers between different workholding functions and part sizes, they have experienced no issues with runout. This consistent accuracy is crucial for producing precision components and maintaining the quality of the parts manufactured by the job shop.
Get the long read at Royal Products
Is this your company?
This article features your business. Claim it to add your logo, contact details, and a link to your website — or upgrade to reach more buyers.
Did you know 80% of Press Releases trigger AI content warnings? Reach out and the M4S team can assist.
